APC 990-1387A user manual Battery Connections

Page 9

RACK MOUNT CONFIGURATION

Refer to the Installation Guide included in Rail Kit SURTRK2 for instructions on mounting the UPS and the external battery packs into a rack.

NOTE: The external battery packs must be mounted below the UPS in the rack.

Installing and Connecting the External Battery Pack(s)

1.Connect the green/yellow ground wires (screws included), as shown in the diagrams below.

TVSS Ground Wire Connections

2.Connect the rear panel batteries as shown in the diagrams below.

Battery Connections

5

Image 9
Contents ภาคผนวกสําหรับภาษาของคูมือการใช ภาษาไทย Page SURT192XLBP External Battery Pack Page Placement of the External Battery Pack IntroductionUnpacking Installing and Connecting the External Battery Packs Installing the External Battery PacksTvss Ground Wire Connections Page Battery Connections Page VA models Setting the UPS to Recognize the Battery PacksPress 4 and Enter to log out Replacing the Battery Module ServiceStorage Regulatory Agency Approvals Declaration of Conformity Contacting APC Limited Warranty