3:OPERATION
Front Display Panel
INDICATOR | DESCRIPTION |
Online | The UPS is supplying utility power to the connected equipment. |
On Battery
The UPS is supplying battery power to the connected equipment.
Overload
The connected loads are drawing more than the UPS power rating.
Replace Battery
The battery must be replaced.
FEATURE | FUNCTION |
| |
Power Button | Press this button to turn the UPS on or off. (Read on for additional capabilities.) | ||
|
| ||
Automatic: The UPS performs a | |||
| every two weeks thereafter (by default). During the | ||
| operates the connected equipment on battery. | ||
| Manual: Press and hold the | button for a few seconds to initiate the | |
|
| ||
Cold Start | To supply battery power to the UPS and connected equipment in the absence of | ||
| utility voltage (see Troubleshooting), press the front display panel button for | ||
| one second and release. The UPS will beep briefly and go quiet. Press and hold | ||
| the | button again, but for approximately three seconds. The unit will emit a | |
| sustained beep. Release the button during this beep. | ||
|
|
|
|
6