American Power Conversion 500 VA guide

Connect Equipment and Power to the UPS

1.Connect equipment to the UPS.

Note: A laser printer draws significantly more power than other types of equipment and may overload the UPS.

2.Add accessories to the Smart-Slot (optional).

3.Connect ground leads to the TVSS screw (optional). To make the connection, loosen the screw and connect the surge suppression device ground lead. Tighten the screw to secure the lead.

4.Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords.

100V/120V models: The power cord is attached to the UPS. The input plug is a NEMA 5-15P.

230V model: The power cord is supplied in the UPS literature kit.

5.120V model: Check the site wiring fault LED located on the rear panel. It will be illuminated if the UPS is plugged into an improperly wired utility power outlet (see Troubleshooting).

6.Turn on all connected equipment. To use the UPS as a master on/off switch, be sure all con- nected equipment is on.

7.Press the button on the front panel to power the UPS.

Note: The battery charges to 90% capacity during the first four hours of normal operation. Do not expect full battery run capability during this initial charge period.

8.For optimal computer system security, install PowerChute Smart-UPS monitoring software.

Rear Panels

100V/120V230V

Basic Connectors

Serial Port	USB Port TVSS Screw

Use only interface kits approved by APC.

Use only the supplied cable to connect to the Serial Port. A standard serial interface cable is in- compatible with the UPS. Serial and USB Ports cannot be used simultaneously.

The UPS features a transient voltage surge-suppression (TVSS) screw for connecting the ground lead on surge suppression devices such as telephone and network line protectors.

When connecting grounding cable, disconnect the UPS from utility power.

500 VA specifications

American Power Conversion (APC) is well-known for its innovative power protection solutions, catering to a wide range of markets, including IT, telecommunications, and industrial environments. Among its numerous products, the APC Back-UPS line, specifically the 500 VA (Volt-Amperes) model, stands out as an essential solution for safeguarding sensitive electronic equipment against unexpected power disturbances.

The APC 500 VA is designed to provide reliable uninterruptible power supply (UPS) capabilities. One of its main features is its ability to deliver battery backup during power outages. This ensures that connected devices continue to operate without interruption, which is particularly critical for computers, networking devices, and telecommunications equipment. The 500 VA model generally offers a power output of around 300 watts, making it suitable for basic setups in home offices or small businesses.

Another significant feature of the APC 500 VA is its Automatic Voltage Regulation (AVR). This technology ensures that the output voltage remains stable, even during voltage fluctuations that can occur during storms or utility grid issues. This protects sensitive electronics from potential damage caused by overvoltage or undervoltage situations.

The UPS is equipped with multiple outlets for connecting various devices. Typically, these outlets are a combination of battery backup and surge protection, ensuring that both type of equipment receives necessary power and protection from surges or spikes. Additionally, the unit often features USB ports for easy connection to a computer, allowing users to monitor UPS status and manage power settings through APC’s PowerChute software.

The design of the APC 500 VA is user-friendly and allows for easy setup. Its compact form factor enables effective space-saving which is ideal for desktop environments. The inclusion of LED indicators provides real-time status updates on power conditions and battery health, giving users peace of mind regarding their equipment's safety.

Finally, the APC 500 VA typically comes with a built-in battery that is replaceable, ensuring long-term usability. Regular battery replacement is crucial for maintaining optimal performance, and APC provides users with this convenience.

In summary, the American Power Conversion 500 VA model is a compact and efficient UPS solution featuring battery backup, Automatic Voltage Regulation, multiple outlets, USB connectivity, and user-friendly indicators. Its reliability and protective features make it an excellent choice for anyone looking to safeguard their electronics against power-related disturbances.