APC SUA2200, SUA3000 manual Maintenance, Transport, and Service, Replacing the Battery Module

Page 15

Maintenance, Transport, and Service

Maintenance, Transport, and Service

Replacing the Battery Module

This UPS has a replacable, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. Leave the UPS and connected equipment on during the replacement procedure.

Once the batteries have been disconnected the connected equipment is not protected from power outages.

Refer to the appropriate replacement battery user manual for battery module installation instructions. See your dealer or contact APC at www.apc.com for information on replacement battery modules.

Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in the replacement battery packing material.

Service

If the UPS requires service do not return it to the dealer. Follow these steps:

1.Review the problems discussed in Troubleshooting in this manual to eliminate common problems.

2.If the problem persists, contact APC Customer Support through the APC Web site, www.apc.com.

–Note the model number of the UPS, the serial number located on the back of the unit, and the date purchased. If you call APC Customer Support, a technician will ask you to describe the problem and attempt to solve it over the phone. If this is not possible, the technician will issue a Returned Material Authorization Number (RMA#).

–If the UPS is under warranty, repairs are free.

–Procedures for servicing or returning products may vary internationally. Refer to the APC Web site for country specific instructions.

3.Pack the UPS in its original packaging. If this is not available, refer to www.apc.com for information about obtaining a new set.

–Pack the UPS properly to avoid damage in transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under warranty.

–Always DISCONNECT THE UPS BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) and IATA regulations. The battery may remain in the UPS.

4.Mark the RMA# on the outside of the package.

5.Return the UPS by insured, prepaid carrier to the address given to you by Customer Support.

Smart-UPS XL 3U Rack Mount 2200/3000 VA 120/230 Vac; 3000 VA 100/200 Vac User Manual

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Smart-UPSXL Page About this UPS AccessoriesRead the Safety Guide before installing the UPS IntroductionSpecifications Installation Install the Rails in the RackInstall the UPS in the Rack and Connect the Battery Module Rear Panels Rear Panel FeaturesStart the UPS Start-up and OperationDisplay Panel Indicators and Function Buttons Indicator Indicator Title DescriptionDisplay Panels Feature Feature Title Function Button UPS settings ConfigurationFunction Factory User Selectable Description Default Choices Connect the Emergency Power Off option User Name apc Password apc Configure UPS parametersPress 2 and Enter to change Battery Settings Press 3 and Enter to select ConfigurationReplacing the Battery Module Maintenance, Transport, and ServiceProblem and/or Possible Cause Solution TroubleshootingProblem and/or Possible Cause Solution There is no utility power 100/200 V models Regulatory and Warranty InformationRegulatory Agency Approvals and Radio Frequency Warnings FCC Compliance Notice ModelsTerms of warranty Two-YearLimited WarrantyDate of product declaration APC Worldwide Customer Support

SUA3000, SUA2200 specifications

The APC SUA2200 and SUA3000 are well-regarded uninterruptible power supplies (UPS) from Schneider Electric, designed to provide reliable power backup and protection for critical electronic equipment. These models cater to a range of applications, from small business environments to larger enterprise setups, ensuring that devices remain operational during power outages or fluctuations.

Starting with the APC SUA2200, it boasts a capacity of 2200 VA / 1980 W, making it suitable for powering essential devices such as network equipment, servers, and workstations. One of its standout features is the Pure Sine Wave output, which ensures that sensitive electronics receive clean power, thus preventing potential damage or operational issues. Additionally, the SUA2200 comes equipped with Automatic Voltage Regulation (AVR) technology, which stabilizes voltage levels and protects connected equipment from surges and sags.

Moving to the APC SUA3000, this model offers even greater capacity, rated at 3000 VA / 2700 W, making it ideal for larger deployments where more power is needed. Similar to the SUA2200, it also features Pure Sine Wave output and AVR technology for enhanced protection. The SUA3000 is designed with a graphical LCD interface that provides real-time information on power status, battery condition, and load levels, allowing users to monitor their UPS system with ease.

Both models utilize high-frequency technology, which results in a smaller and more efficient form factor compared to traditional line frequency UPS systems. They also feature multiple surge-protected outlets, enabling users to connect various devices simultaneously. The SmartSlot feature allows for additional management options with the installation of network management cards, enabling remote monitoring and management capabilities.

The battery management system incorporated into both models extends battery life and ensures efficient charging cycles. Users can expect longer runtimes and the ability to replace batteries easily when needed. Compatibility with APC's PowerChute software also enhances performance by providing advanced management capabilities and system monitoring.

In summary, the APC SUA2200 and SUA3000 serve as robust solutions for organizations seeking reliable power protection. Their combination of high capacity, advanced technologies like Pure Sine Wave output and AVR, along with user-friendly interfaces, make them ideal choices for safeguarding critical electronic equipment against power disruptions. These UPS systems not only ensure uninterrupted power supply but also foster longevity and operational efficiency in power management.
Top Page Image Contents