APC SMC15002U, SMC10002U Product Description, Safety Messages, Safety and General Information

Page 3

Product Description

The APC™ by Schneider Electric Smart-UPS™C is a high performance uninterruptible power supply (UPS). The UPS provides protection for electronic equipment from AC power blackouts, brownouts, sags, and surges, small AC power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until AC power returns to safe levels or the batteries are fully discharged.

This user manual is available on the enclosed Documentation CD and on the APC by Schneider Electric Web site, www.apc.com.

Safety Messages

Read the instructions carefully to become familiar with the equipment before trying to install, operate, service or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

CAUTION

UNPROTECTED OUTPUTS

Apply circuit protection to all outputs.

Failure to follow these instructions can result in equipment damage.

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.

Read the Safety Guide supplied with this unit before installing the UPS.

•This UPS is intended for indoor use only.

•Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

•Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

•The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient temperatures, poor quality AC power, and frequent short duration discharges will shorten battery life.

•Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

WARNING

This is a category C2 UPS product.

In a residential environment, this product may cause radio interference, in which case the user may be required to take additional measures.

Smart-UPS C 1000/1500/2000/3000 VA 120/230 Vac Rack-Mount 2U

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Smart-UPSC Page Safety Messages Safety and General InformationProduct Description Specifications Front panel features Rear panel featuresProduct Overview  UPS input InstallationConnect equipment to the UPS OperationStatus Indicators Sensitivity adjustment settingsDisplay panel features LCD status indicators LED status indicators120 Vac 230 Vac Description Display interface featuresConfiguration Mode Feature Reference GuideSystem Faults Normal ModeSensitivity SettingGreen Mode Function Options Description Self-TestProblem and Possible Cause Solution TroubleshootingService Battery ReplacementTransport Two Year Limited Factory Warranty Smart-UPS C 1000/1500/2000/3000 VA 120/230 Vac Rack-Mount 2U Page EN 990-4472C 12/2013 APC by Schneider Electric Worldwide Customer Support

SMC10002U, SMC15002U specifications

The APC SMC15002U and SMC10002U are rugged and reliable line interactive UPS (Uninterruptible Power Supply) systems designed to keep your critical electronic equipment operational during power disruptions. These UPS units are part of APC’s Smart-UPS family, renowned for their efficiency and effectiveness in protecting sensitive electronics in office and home environments.

One of the main features of both models is their ability to deliver pure sine wave output. This ensures that connected devices receive clean power, which is crucial for sensitive equipment like servers, networking hardware, and telecommunications systems. This feature significantly reduces the risk of damage or malfunction in sensitive electronics compared to standard modified sine wave UPS systems.

The SMC15002U offers a capacity of 1500 VA/900 W, while the SMC10002U provides 1000 VA/600 W. This flexibility allows users to select a model based on their specific power requirements, catering to various applications from small businesses to home offices. Both models incorporate Automatic Voltage Regulation (AVR) technology, which stabilizes voltage fluctuations by automatically adjusting the incoming voltage. This feature helps ensure that connected devices operate consistently and enhances their lifespan.

Battery management is another strong point of the SMC series. These UPS models utilize intelligent battery management systems that prolong battery life and provide notifications for battery replacement. The user-friendly LCD interface displays real-time information about the UPS's status, including battery capacity, load level, and input/output voltage levels, allowing for seamless monitoring.

Furthermore, the SMC15002U and SMC10002U include multiple outlets, providing ample connectivity for various devices. They also have a compact rack-mountable design, which is ideal for data centers and network closets where space is at a premium. The ability to integrate with network management systems through optional accessories allows for remote monitoring, enabling IT administrators to respond to power events swiftly.

In summary, the APC SMC15002U and SMC10002U are advanced UPS solutions that combine high-capacity power, pure sine wave output, AVR technology, and intelligent battery management to protect critical electronic equipment. Their robust features and reliability make them a valuable asset for anyone looking to safeguard their investments in technology against power interruptions.
Top Page Image Contents