AEG 400 KVA manual Fluxpower HPS, Specification

FLUXPOWER HPS

SPECIFICATION

Model (kVA)	400	500	600	800
Capacity rating (kVA)	400	500	600	800
Dimensions W x H x D (mm)	1990 x 1920 x 990	2440 x 2020 x 990	2440 x 2020 x 990	3640 x 1920 x 990
Weight (kg)	1820	2220	2400	3600
Input / output connection		Hard wired (dual input)
Battery		External, 300-312 cells
INPUT
Nominal voltage	220 / 380, 230 / 400, 240 / 415 VAC single / 3-phase
Voltage range		-20 %, +15 % at 400 V nominal
Frequency		50 / 60 Hz (45 – 65 Hz)
Power factor		0.99
Current distortion (THDi)		<3.5 %
OUTPUT
Nominal voltage	220 / 380, 230 / 400, 240 / 415 V AC three phase
Frequency		50 / 60 Hz
Voltage regulation	±1 % static; ±5 % dynamic 100 % load change
PF acceptable without de-rating		Lagging to leading 0.9
Overload capacity	101 – 125 % for 10 min (on-line), 126 – 150 % for 1 min (on-line),
		1000 % for 1 cycle (bypass)
Efficiency; VFI, double-conversion		≤94.8 %
Efficiency; Wise ECO mode		95 – 98 % (>98 %)
OPTIONS
General	8 x parallel capacity/redundancy, sync control, isolation transformer, external
	bypass, external battery cabinets, battery switch box, battery thermal probe,
	transformers / autotransformers for voltage adaption, top cable entry
USER INTERFACE
Front panel	Graphical LCD display, mimic with LED’s and keyboard
Standard communication ports	RS232 serial, USB, Remote Emergency Power Off input, Battery Switch status
	monitoring, External Manual Bypass status monitoring, Diesel Mode
Optional communication	Web / SNMP, ModBus, Relay, Modem cards; Remote panel;
	Monitoring, Managing and shutdown software
ENVIRONMENTAL
Operating temperature		0 °C – +40 °C
Storage temperature		-10 °C – +70 °C
Altitude	<1000 m; 1 % power derating each 100 m above, max. 2000 m
Audible noise at 1 meter dB(A)		<60
STANDARDS AND CERTIFICATION
Marking and certification		CE, GOST, ECA ETL
Safety		IEC EN 62040-1
EMC		IEC EN 62040-2
Test and Performance		IEC EN 62040-3
Quality, environment, health and safety	ISO9001:2008, ISO 14001:2004, BS OHSAS 18001:2007

AEGPS - Fluxpower HPS - EN - 08/2013 V1 - Technical data in this document does not contain any binding guarantees or warranties. Content only serves for information purposes and can be modified at any time. We will make binding commitments only upon receipt of concrete enquiries and customer notification of the relevant conditions. Due to the non-binding nature of these terms, we assume liability neither for the accuracy nor completeness of the data provided here. AEG is a registered trademark used under license from AB Electrolux.

AEG Power Solutions

Approach your local AEG Power Solutions representative for further support. Contact details can be found on:

www.aegps.com