FLUXPOWER HPS
400-500-600-800 KVA
High power solution for large,
Flexible and smart
The innovation and design of the Fluxpower HPS high power UPS has resulted in the unit being the most technologically advanced in its class.
It delivers an incredible combination of low input current distortion, unity input power factor and high overall efficiency. These advances in design offer numerous benefits, including lower running costs and substantially increased reliability.
Low THDi and power factor performance
The Fluxpower HPS model UPS uses a completely new IGBT input rectifier design, encompassing an advanced PFC (Power Factor Control) which is capable of keeping input current THDi (Total Harmonic Distortion) at a level of less than 3 % and input power factor within 1 % of unity, even when only small loads are applied.
The key benefits are that the UPS is compatible with the upstream source, the mains or any kind of generator and the transfer of power between source and load is more efficient. This results in a saving in terms of scale of sources, cables and protective devices.
High efficiency reduces overall cost of ownership
Fluxpower HPS has a new Wise ECO function which enables a total operating efficiency of between 95 % and 98 %. This mode, referred to as “Intelligent ECO mode”, significantly reduces the utility costs associated with operating a device of this type. Moreover, this increase in efficiency results in the production
of less waste heat, minimizing cooling /
The Wise ECO function uses continual monitoring techniques to review the input characteristics of the supply. This means that if the supply line drops or fluctuates outside of acceptable conditions the UPS uses the internal inverter to support the load. This is achieved through a fast, fully static transition from VFD to VFI mode.