Installation and Configuration
Daisy Chaining
The autoloader does not support daisy chaining with other products. You can daisy chain one additional autoloader using the
Ethernet Connection
Attach one end of the
Note: This step is not required for operation, but is necessary if you want to use the autoloader Web administration feature.
Power On
Carefully inspect your power cord and make sure that it is the correct one for your country or region. If the power cord is not correct, contact your customer service representative.
To connect the power cord:
1.Make sure that the power switch on the back of the autoloader is off (the 0 is pressed).
2.Connect the female end of the power cord to the power connector on the back of the autoloader.
3.Plug the male end of the power cord into the power source.
38 | SSL1016 Tape Autoloader Reference Guide |
