HP SSL1016 manual View Tape Drive Version, Scsi ID

Autoloader Operation

Table 10: Tape Drive Status Messages

SCSI ID	The number indicates the autoloader SCSI ID number.
Loader LUN	The number indicates the Logical Unit Number of the
	autoloader.
Compression	Indicates whether the tape drive compression is enabled or
	disabled.
Drive Cart	Indicates whether a cartridge is present in the drive.

View Tape Drive Version

To view the tape drive version:

1.On the main menu, scroll to Status. (See Figure 61.)

2.Press Enter.

3.On the Status submenu, scroll to Drive Info. (See Figure 62.)

4.Press Enter.

5.On the Drive Info submenu, scroll to Version. (See Figure 63.)

6.Press Enter.

A list of messages similar to the following screen appears.

Product Type: DLT 1 Policy Version:

35.52

Servo Version: 65.6

Figure 70: Tape drive version screen

Table 11: Tape Drive Version Messages

Product Type	The number indicates the type of product installed (DLT1).
Policy Version	The number indicates the version of the policy processor for
	the tape drive, typically the tape drive firmware version.
Servo Version	The number indicates the servo processor firmware version.

94 SSL1016 Tape Autoloader Reference Guide