Autoloader Operation
Run Inventory
The autoloader automatically runs an inventory when you power it back on or insert a magazine. If you need to run an inventory in addition to this, you can use Web Administration to do it remotely.
To run an inventory:
1.On any Web Administration page, click Commands.
2.On the Commands page, click Inventory.
Set to Home
If the autoloader is not able to successfully execute a move or inventory command, try executing a HOME command and then retry the move or inventory command again.
The HOME command resets the autoloader as a means to help the autoloader recover from an unknown internal condition. You should very rarely need to use this command.
To set to Home:
1.On any Web Administration page, click Commands.
2.On the Commands page, click Home.
SSL1016 Tape Autoloader Reference Guide | 103 |
