HP SSL1016 manual View Status Information, Move Tapes

Autoloader Operation

View Status Information

To view status information from Web Administration, you only have to open it. You do not need to execute any command to see it because the status information appears on the right side of every page. This information is updated automatically every 10 seconds, so the status you see is real-time information.

Move Tapes

To move a tape:

1.On any Web Administration page, click Commands.

2.From the drop-down menu under Move tape from:, select the current location of the tape you want to move.

Note: You can also click the slot on the graphic to select it.

3.From the drop-down menu under To:, select the location to which you want to move the tape.

4.Click submit.

SSL1016 Tape Autoloader Reference Guide 101