HP SSL1016 manual Set the Cleaning Mode, Cleaning Tape

Autoloader Operation

Set the Cleaning Mode

To enable the Auto Clean function, you must have a slot designated for the cleaning tape cartridge. If you or another user have already designated a slot, that slot’s number appears next to Cleaning Cartridge Location. If a slot has not been designated, the box is empty.

Note: Auto Clean is not supported on Windows 2000 removable storage.

To set the cleaning tape slot:

1.On any Web Administration page, click Configurations.

2.From the drop-down list next to Cleaning Cartridge Location, select the number of the slot in which you want to store the cleaning cartridge.

3.Click submit.

Figure 84: Cleaning Tape

If you want to set the Auto Clean option, use the following procedure. To clean the tape drive manually, use the Move function to load and unload the cleaning tape from the tape drive.

110 SSL1016 Tape Autoloader Reference Guide