Autoloader Operation

Set the Import/Export Slot

To set the I/E slot:

1.On any Web Administration page, click Configurations.

2.If a checkmark appears in the box next to I/E Slot, the I/E slot is enabled.

3.If no checkmark appears in the box next to I/E Slot, the I/E slot is disabled.

4.Click submit.

Figure 85: Import/Export Slot

Any change requires a power cycle of the autoloader and reconfiguration of the ISV software. If the autoloader is not power cycled:

The changes will not occur

The front panel red LED flashes and displays a “Please power cycle” message When the I/E slot is enabled, Slot 16 is designated as the I/E slot.

112

SSL1016 Tape Autoloader Reference Guide

Page 112
Image 112
HP SSL1016 manual Set the Import/Export Slot