HP SSL1016 manual Set Passwords, Select Security

Installation and Configuration

2.Press Enter.

3.On the Configuration submenu, scroll to Security.

Cleaning Tape

Compression

I/E Slot

Security

Figure 41: Select Security

4.Press Enter.

5.On the Security submenu, scroll to Security. If a checkmark appears after the word, the security option is on. If no checkmark appears, the security option is off.

3Security

Set Password

Figure 42: Security options

6.To change the setting, press Enter.

This toggles the security option. For example, if the security option was set to On, it is now set to Off, and no checkmark appears.

Set Passwords

Many operations on the autoloader are password-protected to ensure data integrity. You can set passwords at the administrator level and at the operator level. Operator-level users have access to the Commands and Status menus. Administrator-level users have access to all functionality.

Passwords must be exactly six numbers long. The default password is 000000.

To set a password:

1.On the main menu, scroll to Configuration. (See Figure 40.)

2.Press Enter.

3.On the Configuration submenu, scroll to Security. (See Figure 41.)

4.Press Enter.

SSL1016 Tape Autoloader Reference Guide 57