HP SSL1016 manual Set the System Time

Autoloader Operation

4.While the test is running, you can view the status of the test by clicking View Status. To refresh the status information, click the Back button on your browser, and then click the View Status button again.

5.To save the report, click File, Save As, then navigate to the directory where you want it saved.

Set the System Time

If your autoloader is not connected to a time server, you can set the time manually with Web Administration.

Note: The DLT1 and SDLT autoloaders do not have a battery so if time is manually set, it is lost and needs to be reset whenever the autoloader is power cycled.

Enter the time zone first, then the date and time. If you want to include time changes, such as daylight savings time, you must set those manually when they occur.

To set the time zone:

1.On any Web Administration page, click Configurations.

2.From the first drop-down list next to Time Zone, select the number of hours’ difference between your local time and Greenwich Mean Time (GMT).

3.From the second drop-down list next to Time Zone, select the number of minutes’ difference between your local time and Greenwich Mean Time (GMT).

4.Click submit.

SSL1016 Tape Autoloader Reference Guide 105