HP SSL1016 manual Set Security Option, Security option

Autoloader Operation

Set Security Option

When you enable the security option, users must enter a password to access the autoloader’s functionality. A password allows either administrator-level access or operator-level access. (For more information on levels of password-protection, see “Security.”)

To set the security option:

1.On any Web Administration page, click Configurations.

2.On the secondary menu, click Security.

Figure 87: Security option

3.If a checkmark appears in the box next to Security, the security option is enabled. To disable the security option, click the box to remove the checkmark. If no checkmark appears in the box next to Security, the security option is disabled. To enable the security option, click the box to enter a checkmark.

4.Click submit.

SSL1016 Tape Autoloader Reference Guide 115