Autoloader Operation
After Load cartridge appears on the LCD, a countdown appears. You have 20 seconds to load a cartridge through the mailslot before it relocks. The autoloader automatically loads the cartridge into the selected slot.
Moving a Single Cartridge
To move a single cartridge from one location to another inside the autoloader:
1.On the main menu, scroll to Commands.
2.Press Enter.
3.On the Commands submenu, scroll to Move.
4.Press Enter.
The Move screen appears.
5.Under From:, scroll to the current location of the cartridge you want to move. Occupied slots are indicated by an asterisk.
Note: If you select an empty location No Source Element appears on the LCD. Choose a different location.
6.Press Enter.
7.Under To:, scroll to the location to which you want to move the cartridge. Occupied slots are indicated by an asterisk.
Note: If you select a location that is already occupied Destination Full appears on the LCD. Choose a different location.
8.Press Enter.
The LCD displays Ent or Esc? below your selections.
9.Press Enter.
An hourglass appears on the LCD as the autoloader moves the cartridge to its new location.
SSL1016 Tape Autoloader Reference Guide | 79 |
