Autoloader Operation
View Firmware Version
To view the firmware version:
1.On the main menu, scroll to Status. (See Figure 61.)
2.Press Enter.
3.On the Status submenu, scroll to Autoloader Info. (See Figure 62.)
4.Press Enter.
5.On the autoloader Info submenu, scroll to Version. (See Figure 63.)
6.Press Enter.
A list of messages similar to the following screen appears.
Firmware: V7.0
EDC: 575A49B8
HW + ME Rev: 1 1
Figure 65: Autoloader version messages
Table 9: Autoloader Version Messages
Firmware | The number indicates the firmware version. |
|
|
EDC | The number indicates the Error Detection Code that |
| was generated when the firmware was installed. The |
| autoloader uses this number to verify that the firmware |
| and the memory holding the firmware are good. |
|
|
HW Rev | The number indicates the hardware version. |
|
|
ME Rev | The number indicates the mechanical version. |
|
|
SSL1016 Tape Autoloader Reference Guide | 91 |
