Installation and Configuration
7.At each position of the server address, scroll to the correct number and press Enter to advance your cursor.
SNMP Server:
255.255.255.255
Figure 31: Setting the SNMP server address
Note: Use the Escape key to backspace to a previous text box, if necessary.
When you have set the server address, the autoloader displays Enter to save.
8.Press Enter.
SNMP Server changed to appears on the LCD. You do not need to reboot the autoloader.
9.Press Escape or Enter to return to the Ethernet submenu.
Time Server
You can connect the autoloader to a server that will supply the correct date and time using Simple Network Time Protocol (SNTP). The autoloader uses this information to time stamp information in its memory.
To set a time server:
1.On the main menu, scroll to Configuration. (See Figure 25.)
2.Press Enter.
3.On the Configuration submenu, scroll to Ethernet. (See Figure 26.)
4.Press Enter.
5.On the Ethernet submenu, scroll to Set Time Server. (See Figure 27.)
6.Press Enter.
52 | SSL1016 Tape Autoloader Reference Guide |
