Installation and Configuration
To set the control mode:
1. On the main menu, scroll to Configuration.
Status
Commands
Configuration
Diagnostics
Figure 22: Main menu
2.Press Enter.
3.On the Configuration submenu, scroll to Change Mode.
SCSI ID
Ethernet
Time
Change Mode
Cleaning Tape
Figure 23: Select Change Mode
4.Press Enter.
The mode options appear. A checkmark appears after the enabled mode.
3Random Mixed Sequential Seq Cycle Mode
Figure 24: Mode Options
5.Do one of the following:
■To change the control mode, scroll to the desired mode and press Enter. A checkmark appears. Press Enter again.
■To leave the control mode unchanged, press Escape.
6.Reboot for the new mode to take affect.
a.Press and hold the power button on the front panel until Power Off appears on the LCD.
b.Press the power button again to power on the autoloader.
The new control mode is now in effect.
SSL1016 Tape Autoloader Reference Guide | 45 |
