Composing Messages, Printing con’t, Erasing

Composing Messages

•Insert a Font Disc (if a different Font is desired) as shown. (fig.1)

•Type in words or phrases.

(fig.1)

•Select a size. (fig.2)

•Insert a Blank Disc. (fig.3)

•Press the save button. (fig.4)

(fig.2)

•After saving text to a Blank Disc, remove the Blank Disc from the Xyron® Design Disc™ Maker and insert it

into the Xyron® Design Runner™. (fig.5)

•Scroll to the image you want to print - the images are numbered in the order that you saved them.

(fig.3)

•Place the white ‘+’ on the right side of the Design Runner on the project where you want to begin printing. (fig.6)

•Press and hold the green button.

•Wait for the ‘P’ to appear on the bottom left of the LCD screen.

(fig.4)

•Keep the green button pressed and move the Xyron® Design Runner™ to the right until printing is complete.

(fig.5)

• Insert a Blank Disc into the Blank Disc

	Slot. Scroll through the content on the
	disc by simultaneously pressing and
	holding the Shift button and Left or	(fig.6)
	Right Arrow buttons to make sure you	(fig.6)
	Right Arrow buttons to make sure you
	want to delete the content on the disc.
	• To erase the last saved message on a
	Blank Disc, press the Shift button and
	the Delete button at the same time and
	hold for 3 seconds (fig.7)
	• To erase all content on a disc, press the	(fig.7)
	Purple, Green and Delete buttons at	(fig.7)
	Purple, Green and Delete buttons at
	the same time and hold for 3 seconds. (fig.8)

(fig.8)

TO DELETE LAST MSG, KEEP PRESSED

TO DELETE DISC

KEEP PRESSED

5	6