SAFETY INFORMATION
When using electrical appliances, basic precautions should always be taken to re- duce the risk of electrical shock and injury to persons, including the following:
1.Read all instructions before connecting or operating this unit.
2.Retain this Owners Manual for future reference. For technical assistance beyond what is covered in this manual contact Technical Service.
3.Save your carton! PHOENIX laminators are shipped in special cartons and should be used in case your PHOENIX laminator should ever require service or need to be transported.
NOTICE! Failure to return machines properly packed in original packaging will impose a fifteen percent restocking fee plus costs to repair shipping damage. Contact Technical Service for a return authorization (see WARRANTY AND AUTHORIZED REPAIR CENTERS).
4.Do not use the laminator for other than its intended use.
5.The Laminator case may be cleaned with a
NOTE: Disconnect the laminator from the main power supply before cleaning!
6.Do not immerse any part of the laminator in water or other liquids..
7.The laminator's location or position should not interfere with its proper ventilation. Do not install or place in a
8.Do not operate the laminator with a damaged cord or plug, or after the laminator has been dropped or damaged in any manner. If purchased in U.S./Canada,
return the laminator to your ADEMCO reseller for examination, repair or adjustment.
8.Do not let the cord hang over the edge of a counter/bench or touch hot surfaces.
9.Always unplug the laminator when it is not in use for a long period.
10.This unit should only be connected to a power supply outlet of the voltage, amperage, and frequency marked on the rear panel. The laminator has a grounded plug (three prongs). To reduce the risk of electrical shock, this plug is intended to fit only a grounded outlet of the proper amperage, and in only one way.
If the plug does not fit in the outlet, contact a qualified electrician.
WARNING! Do not modify the plug in any way.