Royal Sovereign RSH-1050, 1650, RSR-685 owner manual Useful Information

Page 20

2.Set the pressure lever to the “Laminating mode”

3.Increase roller temperature. If you already memorized special working condition,

press MEMORY button and choose right condition by using

or

button.

 

4.When it’s ready, you will see ready sign on the screen and the buzzer will ring.

5.Press the RUN button. If rollers don’t run, check the emergency switch whether it is located at “ON” position or not.

6.To set film tension properly, use the Tension Control Knob. Lower tension would make better operation.

7.Set document on the table. You should allow at least 5mm(1/4”) space on each side for perfect laminations.

8.Press the STOP button when your lamination is finished.

9.For your convenience, it would be better to set table guide in proper position.

10.When lamination is just finished, it is hot and easily bent. Try not to touch it until it cools down.

11.After finishing your work, set the pressure lever to the “Hard Board/15mm

12.Turn the Power switch off

***Useful Information***

1.It would be easier for you to operate the machine next time if the temperature and the speed are set at the best condition and memorized

by the using MEMORY function.

2 sign may appear on LCD window in the case continuous laminating.

- 20 -

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Royal Sovereign Laminators Table of Contents Safety Precautions InstructionDescription CharacteristicSpecifications Names of Major Parts of Machine How to install the rewinder How to install the unwinder Setting UP Film Plate-Unwinder R M6 hexagonal BoltHanging Film RSH-1050/1650 RSR-685/1050 HOT FilmCold Film Control of Roller Pressure RSH-1050/1650RSR-685/1050Instructions for Control Panel Methods of controlling pressure of the rollerTerms LCD WindowFunctions of Buttons BlinkingHOW to USE Buttons Set the upper/ lower hot rollersTo set the temperature Speed controlsCheck current temperature on the hot rollers Use the memorized working conditionCold mode Laminating Steps HOT LaminatingUseful Information RSR-685/1050 RSH-1050/1650 Laminating Speed at each level〔mmft/min〕Cold Laminating Tips for Remote Control and Foot Switch ReferenceCross Cutter Method for Using CutterImportant Safety Concerns Maintenance Extreme Heat Will Cause InjuryWarranty Spare PartsSpeed & Temperature Adjustment Micron 115 Mil 120 125 130 135 140 10 mil

1050, 1650, RSH-1050, RSR-685 specifications

The Royal Sovereign RSR-685, RSH-1050, RSH-1650, and RSH-1050 are a series of high-quality laminating and finishing machines designed for both commercial and industrial applications. Each model offers unique features and capabilities, making them ideal for various print finishing tasks.

Starting with the RSR-685, this compact and efficient laminator is engineered for small to medium print runs. One of its standout features is the ability to laminate in both hot and cold processes, providing versatility for different types of media. The machine includes an intuitive control panel, enabling users to set precise temperature and speed settings easily. Additionally, the RSR-685 utilizes a high-quality silicon roller that ensures even heat distribution, minimizing the risk of defects during the laminating process. With a maximum lamination width of 27 inches and a top speed of 16.4 feet per minute, it is suitable for a variety of applications, including documents, photographs, and other printed materials.

Next, the RSH-1050 model is built for those requiring higher production capabilities. This machine boasts an impressive lamination width of up to 39 inches, accommodating larger materials. The RSH-1050 is designed with advanced features like a programmable digital control system and an automatic feed system, enhancing operational efficiency. The built-in safety features prevent overheating and reduce the risk of injury, making it a reliable choice for any busy workspace.

The RSH-1650 model further expands on these features, offering a greater lamination width of 63 inches, specifically catering to larger format prints. This high-speed laminator can achieve speeds of up to 33 feet per minute, which is particularly beneficial for high-volume operations. It incorporates dual rollers for consistent results and utilizes state-of-the-art technology to ensure minimal waste and maximum productivity.

Finally, the RSH-1050 offers a balance between functionality and affordability, making it a compelling option for mid-sized printing businesses. It inherits many features from its larger counterparts, including adjustable speed and temperature controls, ensuring that users can achieve optimal results tailored to their specific materials.

In conclusion, the Royal Sovereign RSR-685, RSH-1050, RSH-1650, and RSH-1050 represent a robust lineup of laminating solutions characterized by their advanced technologies, user-friendly controls, and efficient production capabilities, making them suitable for a wide array of printing and finishing needs. Whether for small runs or large-scale applications, these machines deliver quality, speed, and versatility, contributing to enhanced finishing workflows.
Top Page Image Contents