Royal Sovereign 1650, RSH-1050, RSR-685 Laminating Speed at each level〔mmft/min〕, Cold Laminating

Page 21
signal on the LCD window.

If it happens, the speed needs to be lowered by one speed level and started again after

3. In case of wrinkling or rolling of film due to wrong position of document,

REV is needed to be keeping pushed in order that document could come out to the front with buzzer sound.

4.When document is much smaller than film, you should place it in the middle of film for preventing wrinkle

5.Use cooling fan when you laminate continuously without break and document is too hot.

***Laminating Speed at each level〔mm(ft)/min〕***

SPEED

RSR-685/1050

RSH-1050/1650

 

 

 

1

800mm(2.6ft)

400mm(1.3ft)

2

1200mm(3.9ft)

600mm(2ft)

3

1600mm(5.2ft)

800mm(2.6ft)

4

2000mm(6.56ft)

1000mm(3.3ft)

5

2400mm(7.9ft)

1200mm(3.9ft)

6

2800mm(9.2ft)

1400mm(4.6ft)

7

3200mm(10.5ft)

1600mm(5.2ft)

8

3600mm(11.8ft)

1800mm(5.9ft)

9

4000mm(13.1ft)

2000mm(6.6ft)

The above laminating speed numbers are at the condition on regular voltage with almost no film tension. There might be the possibility for difference to the above numbers due to the change of voltage or adjustment of tension.

2.COLD LAMINATING

1.Put cold roll film on upper bar.(Set the same as methord of HOT film for protect paper of lower part)

2.Pull COLD film, and fix it so that backside protecting paper can be wound on

take-up mandrel clockwise. (Revolve core to make protectingpaper tight a little bit.) 3. Set pressure lever at the proper position following to your lamination condition.

- 21 -

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Royal Sovereign Laminators Table of Contents Instruction Safety PrecautionsCharacteristic SpecificationsDescription Names of Major Parts of Machine How to install the rewinder How to install the unwinder Plate-Unwinder R M6 hexagonal Bolt Setting UP FilmHanging Film HOT Film Cold FilmRSH-1050/1650 RSR-685/1050 RSH-1050/1650RSR-685/1050 Control of Roller PressureMethods of controlling pressure of the roller Instructions for Control PanelLCD Window TermsBlinking Functions of ButtonsSet the upper/ lower hot rollers HOW to USE ButtonsSpeed controls To set the temperatureUse the memorized working condition Check current temperature on the hot rollersCold mode HOT Laminating Laminating StepsUseful Information Laminating Speed at each level〔mmft/min〕 Cold LaminatingRSR-685/1050 RSH-1050/1650 Reference Tips for Remote Control and Foot SwitchMethod for Using Cutter Important Safety ConcernsCross Cutter Extreme Heat Will Cause Injury MaintenanceSpare Parts WarrantySpeed & Temperature Adjustment Micron 115 Mil 120 125 130 135 140 10 mil

1050, 1650, RSH-1050, RSR-685 specifications

The Royal Sovereign RSR-685, RSH-1050, RSH-1650, and RSH-1050 are a series of high-quality laminating and finishing machines designed for both commercial and industrial applications. Each model offers unique features and capabilities, making them ideal for various print finishing tasks.

Starting with the RSR-685, this compact and efficient laminator is engineered for small to medium print runs. One of its standout features is the ability to laminate in both hot and cold processes, providing versatility for different types of media. The machine includes an intuitive control panel, enabling users to set precise temperature and speed settings easily. Additionally, the RSR-685 utilizes a high-quality silicon roller that ensures even heat distribution, minimizing the risk of defects during the laminating process. With a maximum lamination width of 27 inches and a top speed of 16.4 feet per minute, it is suitable for a variety of applications, including documents, photographs, and other printed materials.

Next, the RSH-1050 model is built for those requiring higher production capabilities. This machine boasts an impressive lamination width of up to 39 inches, accommodating larger materials. The RSH-1050 is designed with advanced features like a programmable digital control system and an automatic feed system, enhancing operational efficiency. The built-in safety features prevent overheating and reduce the risk of injury, making it a reliable choice for any busy workspace.

The RSH-1650 model further expands on these features, offering a greater lamination width of 63 inches, specifically catering to larger format prints. This high-speed laminator can achieve speeds of up to 33 feet per minute, which is particularly beneficial for high-volume operations. It incorporates dual rollers for consistent results and utilizes state-of-the-art technology to ensure minimal waste and maximum productivity.

Finally, the RSH-1050 offers a balance between functionality and affordability, making it a compelling option for mid-sized printing businesses. It inherits many features from its larger counterparts, including adjustable speed and temperature controls, ensuring that users can achieve optimal results tailored to their specific materials.

In conclusion, the Royal Sovereign RSR-685, RSH-1050, RSH-1650, and RSH-1050 represent a robust lineup of laminating solutions characterized by their advanced technologies, user-friendly controls, and efficient production capabilities, making them suitable for a wide array of printing and finishing needs. Whether for small runs or large-scale applications, these machines deliver quality, speed, and versatility, contributing to enhanced finishing workflows.
Top Page Image Contents