SETTING UP FILM
COLD FILM
PAPER BACK
1. Set the glossy side of upper/lower film to face the heat.
( Glossy side is PET film and matte side is thermal polymer laminating film.)
2.Like picture 1, insert core into the left side of upper/lower film shaft.
3.Like picture 2 and 3, insert core into the right side of upper/lower film.
4.Like picture 4 and 5, adhere core closely.
(Make the right/left direction of fixing screw consistent.)
5.Locate film in the middle, and then fasten core fixing screw.
- 6 -