Troubleshooting
Symptom | Solution | |
|
| |
Motor does not work. | Check to make sure machine is plugged in. Check to make sure the power | |
button is turned on. | ||
| ||
| Make sure that the machine is set to the correct setting. The setting should be | |
Pouches are not laminating correctly. | the same as the thickness of the pouch you are using. Ex. 3 mil pouch film | |
| should be set to 3 mil setting. | |
| The automatic reverse function has turned on to retrieve the item. The item you | |
The machine is beeping and the pouch is returning | are laminating may be jammed or too large to pass the rollers. Wait for the | |
out of the front of the machine. | pouch to exit the front of the machine. You can try laminating again after 15 | |
| seconds. | |
The rollers are moving, but the laminated item is not. | Hold down the reverse button until the entire pouch has exited the front of the | |
machine. You can try laminating again after 15 seconds. | ||
|
If you are still having complications, please contact Royal Sovereign’s Service Center at
SPECIFICATIONS
Model |
|
|
|
Dimensions | 22" x 9.8" x 6.5" / 560 x 250 x 165(mm) |
Maximum laminating width | 13" / 340mm |
Film thickness | 3~7 mil / 75~175 micron |
Number of rollers | 4 |
Cold mode | Yes |
Heating system | Hot shoe |
Ready time | Approximately 4 minutes |
Motor type | AC motor |
Laminating speed | 20" per min / 520 mm per min |
Weight | 17.6lbs / 8kg |
Voltage/Cycle | 120V ,60Hz |
Power consumption | 820W |
7