Connecting the data cable
The printer comes with a standard high speed bidirectional IBM Centronics compatible parallel data interface as standard. This requires a IEEE1284 compliant parallel printer cable, not more than 1.8m in length.
1Connect one end of the parallel data cable
1 
2Connect the end containing the standard DB25 connector to the host PCs parallel data port (usually designated as LPT1).
Connecting power to your printer | English |
| |
A suitable AC power cable is supplied with your printer, |
|
terminated with the appropriate plug for connection to a |
|
standard AC wall outlet. |
|
1 Ensure the printer on/off switch (1) is off. |
|
2
1
2Connect the cable to the power socket (2) on the rear of the printer.
3Connect the other end of the power cable to a suitable nearby AC power socket outlet.
Setup Guide | 13 |