Windows 95/98 and Windows NT4

Windows 3.1x

The driver for Windows 3.1x is supplied on CD–ROM and floppy disk (use the CD–ROM if possible). Some countries may have several floppy disks. In this case the appropriate Windows driver disk will be clearly labelled.

Your floppy disk drive is assumed to be drive A and your CD-ROM drive is assumed to be drive D. If this is not the case, substitute the correct drive letter for your system.

1Ensure that all documents are saved and all Windows applications are closed.

2In Windows Program Manager, choose File–Run…

3Insert the Windows 3.1x driver diskette or CD-ROM which came with your printer into the appropriate drive.

4If installing from floppy disk, type A:\SETUP.EXE in the dialogue box and click OK.

If you are installing the driver from CD-ROM, type:

D:\SETUP.EXE

in the dialogue box and click OK.

5Follow the on-screen instructions to add the driver for your printer to your system.

When installation is complete, the new printer will be available from within your Windows applications.

Your CD-ROM drive is assumed to be drive D. If this is not the case, substitute the correct drive letter for your system.

1Ensure that all documents are saved and all Windows applications are closed.

2On the Start menu, choose Run…

3When prompted for the file, enter

D:\SETUP.EXE and click OK.

4Follow the on-screen instructions to add the driver for your printer to your system.

When installation is complete, the new printer will be available from within your Windows applications.

English

Setup Guide