Oki PAGE 10I manual Maintenance Menu

2 OperatingYour Printer

Maintenance Menu

The Maintenance Menu includes printer maintenance and operating functions described below.

To enter Maintenance Menu mode:

1.Turn off the printer

2.Press and hold MENU1/Menu2 and turn on the printer. USER MNT displays.

3.Press MENU1/Menu2 again to advance to the next category.

4.Press ENTER to invoke a function; or

5.Press ♣ to see other options, then press ENTER to select the option you want. Press ON-LINE to exit the menu.

Category	Options	Function
MENU RESET		Reset Menu (Level 1) to factory settings.
HEX DUMP		Print a hex dump of received data for diagnostics. to exit hex dump mode, turn
		off the printer.
DRUM CNT RESET		Reset the drum counter after replacing the image drum cartridge.
REC BUF	AUTO*, 8KB, 20KB, 100KB,	Reserves memory area for receive data; larger setting improves computer return
	1MB	time.
OP MENU	ENABLE*	DISABLE=All control panel buttons except ON-LINE are disabled.
	DISABLE	ENABLE=All buttons are active.
X ADJUST	0mm to 2.00mm	Adjust horizontal print position in 0.25 mm increments. Plus (+) indicates right
		movement, minus (-) indicates left movement.
Y ADJUST	0mm to 2.00mm	Adjust horizontal print position in 0.25 mm increments. Plus (+) indicates
		downward movement, minus (-) indicates upward movement.

➯Menu Reset, Drum Count Reset and X-Y Adjust functions can also be selected in the printer software.

OKIPAGE 10i User’s Guide

25

➦