Loading paper
1.Set the left paper guide to the marker for the required paper size and move the right guide to a position slightly wider than your paper width.
2.Insert the paper so that it is up against and flush with the left paper guide.
3.Adjust the right paper guide to fit snugly, but not tightly against the edge of the paper.
4.Lift the paper slightly out of the tray (about 1 cm) and allow it to drop back into place under its own weight. Do not force it down.
Note:
If using letterhead paper, insert the letterhead face down with the top first.
English
Manual feed
Use manual feed for envelopes, transparencies and other print media as follows:
1.Adjust the paper guides (1) to the width of the media being used.
1
1
2.Insert the media squarely into the paper guides to prevent skewing.
Note:
Insert envelopes with flap side down and to the left. Insert letterheaded paper face up with top of page first.
Paper output
Up to 30 sheets of paper (75 g/m2) can be stacked in the output tray and the printed pages exit from the printer face up.
User’s Guide | 5 |