3. Load letter headed paper face down and top edge towards the front of the printer, as shown.
12
4.Adjust the rear stopper (1) and paper guides (2) to the size of paper being used.
To prevent paper jams:
>Do not leave space between the paper and the guides and rear stopper.
>Do not overfill the paper tray. Capacity depends on the type of paper stock.
>Do not load damaged paper.
>Do not load paper of different sizes or types at the same time.
>Do not pull the paper tray out during printing (except as described below for the 2nd tray).
>Close the paper tray gently.
5.If you have two trays and you are printing from the 1st (upper) tray, you can pull out the 2nd (lower) tray during printing to reload it. However, if printing from the 2nd (lower) tray, do not pull out the 1st (upper) tray. This will cause a paper jam.