Oki C5250 manual Colour Menu Settings Explanation

COLOUR MENU

The printer automatically adjusts colour balance and density at appropriate intervals, optimising the printed output for bright white paper viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete.

COLOUR MENU
ITEM	SETTINGS	EXPLANATION
DENSITY	AUTO	If set to AUTO, image density will be
CONTROL	MANUAL	automatically adjusted at power on,
		when a new image drum or toner
		cartridge is installed, and at intervals
		of 100, 300 and 500 drum counts. If
		a 500 drum count interval occurs
		during a print job it will occur at the
		end of that job, and will take up to
		55 seconds. If set to manual, this
		adjustment will only be performed
		when initiated by the next menu
		item.
ADJUST	EXECUTE	Selecting this will perform the auto
DENSITY		density set up immediately.
AJST	EXECUTE	Performs automatic colour
REGISTRATION		registration adjustment. Normally
		this is done on power on and when
		the top cover is opened and then
		closed. This process accurately
		aligns the cyan, magenta and yellow
		images to the black image.
C REG FINE	-3~0~+3
ADJUST	-3~0~+3	Performs fine adjustment of image
M REG FINE	-3~0~+3
		timing in relation to the black image
ADJUST
		component.
Y REG FINE
ADJUST

Menu functions> 38