PAPER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of paper weights and sizes, transparencies and envelopes. This section provides general advice on choice of media, and explains how to use each type.
The best performance will be obtained when using standard 75~90g/m² paper designed for use in copiers and laser printers. Suitable types are:
•Arjo Wiggins Conqueror Colour Solutions 90g/m²;
•Colour Copy by Neusiedler.
Use of heavily embossed or very rough textured paper is not recommended.
Envelopes should be free from twist, curl or other deformations. They should also be of the rectangular flap type, with glue that remains intact when subjected to hot roll pressure fusing used in this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers and laser printers. We strongly recommend Oki transparencies (Order No. 01074101). In particular, avoid office transparencies designed for use by hand with marker pens. These will melt in the fuser and cause damage.
Labels should also be of the type recommended for use in copiers and laser printers, in which the base carrier page is entirely covered by labels. Other types of label stock may damage the printer due to the labels peeling off during the printing process. Suitable types are:
•Avery White Laser Label types 7162, 7664, 7666 (A4), or 5161 (Letter);
•Kokuyo A693X series (A4) or A650 (B5).
Paper recommendations> 10