Oki ML8810n installation instructions Select the Cut Sheet Feeder as the Default Paper Path

Page 5

4.Adjust the position of the paper guides (1) to fit the print media you are using, then re-lock the levers.

5.Fan and straighten the print media, and place it in the CSF.

Front F6_24.jpg

6. Gently move the paper lever to the SET position.

7. Rear Mount Only: Push the stacker back.

Select the Cut Sheet Feeder as the Default Paper Path

1.Press SEL to place the printer off line.

2.Press MODE repeatedly until you see Front CSF on the second line of the display.

The printer changes paths and returns to the on line state. F-CSFappears on the display.

Note: To feed a sheet in manually using the platform, press SEL, then press MODE repeatedly until you see MANUAL on the second line of the display.

5

Image 5

Contents Rear View Installation Front MountFront View Installation Rear Mount For Wide Paper For Narrow Paper For Cards Load PaperSelect the Cut Sheet Feeder as the Default Paper Path Éteignez limprimante Vue frontaleAllumez limprimante Installation Montage arrièrePour du papier large Chargement du papier Montage arrière seulement Rabaissez lempileuse Vista posterior Vista de frenteInstalación Montaje delantero Apague la impresoraEncienda la impresora Instalación Montaje traseroRetire la tapa del engranaje 1. Empuje la lengüeta Para papel estrecho Para tarjetas Cargue papelMueva suavemente la palanca del papel a la posición SET Desligue a impressora Vista frontalInstalação Instalação frontal Ligue a impressora Ligue o cabo no conector no lado esquerdo da impressoraLigue o cabo no conector no lado direito da impressora Instalação traseiraMova a alavanca de ajuste do papel para a posição Colocação do papelPressione SEL para colocá-la off line Destrave as alavancas de travamento