Troubleshooting | Pinnacle Speakers 800 specs

∙With high volume levels of certain types of signals, the subwoofer(s) may be audibly strained. If you hear the subwoofer(s) “breaking-up” or distorting, turn your receiver’s volume level down.

∙If you have any problems or questions please contact your PINNACLE® dealer for further assistance.

TROUBLESHOOTING:

No Sound only from Subwoofer(s) - Please note that the PIN AMP 800 has a thermal protection feature which will shut it off if it gets too hot; it will turn itself back on when it has cooled sufficiently. Otherwise: Check PIN AMP 800 power / volume settings and all connections. Ensure that the center channel mode on the receiver is in the NORMAL or SMALL position. If you have connected the PIN AMP 800 via RCA cable and if your receiver has a subwoofer on/off or variable subwoofer output level control, ensure that the subwoofer option is turned on and that the output level is at maximum. Make sure the RCA cable is connected to the receiver's subwoofer output and not the subwoofer input jack that some receivers have. If the problem persists, refer to the TO OBTAIN SERVICE section of your warranty at the end of this manual.

No Sound only from Left and Right Front Speakers - Check all connections. Ensure that your receiver’s speaker channel A or B is switched on. Note: You must connect your speakers to your receiver’s speaker outputs if you connected the subwoofer(s) via the LINE INPUT(s).

Too Much Bass - Check: PIN AMP 800 volume / phase / frequency controls; receiver bass / loudness controls; program material; move subwoofer(s) further out of corner or away from wall.

Too Little Bass - Check: PIN AMP 800 volume / frequency / phase control positions; all speaker wire phase (+ to +, - to -); receiver tone controls; program material; ensure that the center channel mode on the receiver is in the NORMAL or SMALL position. If your receiver has a variable subwoofer output level control, ensure that the output level is at maximum. Try moving the subwoofer(s) further into a corner or towards the wall. If you have connected the PIN AMP 800 via a single RCA cable you may want to try using a cable splitter (Radio Shack part #42-2535). This will allow you to use both line inputs which will increase the input signal strength to the subwoofer(s).

Rattling Noise: Tighten the binding posts on the PIN AMP 800 & subwoofer(s).

Hum: Check for faulty RCA connecting cable. Try to separate RCA cables from power cords (they can induce hum into the system). If that doesn't work we recommend you turn off your PIN AMP 800 when it is not in use. This is most easily accomplished by connecting its powercord to a switched power outlet.

800 specifications

The Pinnacle Speakers 800 series embodies a perfect blend of engineering excellence and innovative design, catering to audiophiles and casual listeners alike. Renowned for their superior sound quality and sleek aesthetics, these speakers stand as a testament to Pinnacle's commitment to audio perfection.

One of the most striking features of the Pinnacle Speakers 800 is their advanced driver technology. Each speaker is equipped with a neodymium magnet system, allowing for enhanced sensitivity and efficiency. This means that you can enjoy rich and dynamic sound reproduction without the need for excessive power. The midrange drivers are designed to deliver crystal-clear vocals and instrument clarity, ensuring each note is distinct and engaging.

Another notable aspect is the incorporation of proprietary waveguide technology. This innovation expands the sweet spot, providing a more uniform sound experience across a wider listening area. Whether you're sitting directly in front of the speakers or off to the side, the audio remains consistent, making it an ideal choice for larger rooms or gatherings.

The Pinnacle Speakers 800 also features a robust cabinet design using high-quality MDF materials. This construction minimizes unwanted vibrations and resonance, further enhancing sound clarity. The cabinets are finished with elegant veneers, allowing them to blend seamlessly into any home décor while providing an aesthetically pleasing look.

Connectivity is made easy with these speakers, offering both passive and active configurations. This versatility allows users to integrate them seamlessly into their existing audio systems, whether they prefer traditional amplifiers or modern home theater setups.

Moreover, the Pinnacle 800 series is built to last, with durable driver materials and weather-resistant finishes. This quality construction ensures that users can enjoy their favorite music and movies for years to come without compromising on audio fidelity.

In conclusion, the Pinnacle Speakers 800 series combines sophisticated technology, high-quality materials, and sleek design to offer an exceptional audio experience. Whether used for music, movies, or gaming, these speakers stand out for their performance, making them a worthy investment for anyone seeking to enhance their listening experience.