Epson RP-300, RP-310 user manual Loading the Roll Paper

Page 8

2-3. Loading the Roll Paper

Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. (Turn off power switch)

?Turn off power switch.

1.Make sure that the printer is not receiving data; Otherwise, data may be lost.

2.Open the paper roll cover by pulling down the cover-open lever.

3.Remove the used paper roll core if there is one inside.

4.Insert new paper roll as shown.

Page - 7-

Image 8

Contents All specifications are subjected to change without notice RP-300Table of Contents Parts Identifications Setting Up the Printer UnpackingConnecting the Cables USB interface Interface ConnectorSerial interface Cash Drawer Connector Centronics Parallel interfaceLoading the Roll Paper Page DIP Switch Setting Serial Interface SpecificationParallel Interface Specification ? Caution New settings take e ffect when you turn on the printer Error indicating Control panel and other functionsControl panel ButtonCompleted Self TestRunning the self test Specifications Environmental RequirmentsReliability CertificationCommand List ESC @GS H Memo Memo Memo