Epson RP-310, RP-300 user manual Parallel Interface Specification

Page 11

Paper low detect (? 1)

SW	FUNCTIONS	ON	OFF
6	Paper Low	Detect	Do not Detect

(? 1) The detecting function of [Paper Low] is an option.

Please set Dip Switch (2-6) [OFF] if you don ’t need any option.

If Dip Switch is [ON] without any special option purpose. Printer detects [Paper is Low] and it could cause error.

2-4-2. Parallel Interface Specification

DIP Switch Set 1 Functions

SW	FUNCTIONS	ON	OFF	DEFAULT

1	Reserved	-	-	OFF

2	Hexadecimal	HEXDUMP	NORMAL	OFF

3	Reserved	-	-	OFF

4	Reserved	-	-	OFF

5	Parallel mode	UNIDIRECTION	BIDIRECTION	OFF

6	Reserved	-	-	OFF

Baud rate selection

Transmission speed	SW-7	SW-8	DEFAULT

Reserved	-	-	OFF

Reserved	-	-	OFF

Reserved	-	-	OFF

Reserved	-	-	OFF

DIP Switch Set 2 Functions

Print Density

Print Density	SW-1	SW-2

Lower Power	ON	ON

Normal	OFF	ON

Normal	ON	OFF

Dark	OFF	OFF

Cutter

SW	FUNCTIONS	ON	OFF	Remarks

3	Cutter	FULL CUT	PARTIAL CUT	Only Epson mode

Page - 10-

Image 11

Contents RP-300 All specifications are subjected to change without noticeTable of Contents Parts Identifications Unpacking Setting Up the PrinterConnecting the Cables USB interface Interface ConnectorSerial interface Centronics Parallel interface Cash Drawer ConnectorLoading the Roll Paper Page Serial Interface Specification DIP Switch SettingParallel Interface Specification ? Caution New settings take e ffect when you turn on the printer Button Error indicatingControl panel and other functions Control panelCompleted Self TestRunning the self test Certification SpecificationsEnvironmental Requirments ReliabilityESC @ Command ListGS H Memo Memo Memo