Epson PRP-080 user manual Connectors

2.2) Connectors

a. Interface Connectors Refer to Interface explain.

b. Power Supply Connector

This connector is used to connect the printer to an external power source. Power Supply Connector Pin Assignments

Pin Number	Signal Name
1	+24 VDC
2	GND
3	NC
Shell	Frame GND

c. Drawer Kick-out Connector (Modular Connector)

The pulse specified by ESC p or DLE DC4 is output to this connector. The host can confirm the status of the input signal by using the DLE EOT, GS a, or GS r commands.

1.	Pin assignments: Refer to Table
2.	Connector model: Printer side:	MOLEX 52065-6615 or
		RJ11 telephone jack
	User side:	6-position 6-contact
		(RJ11 telephone jack)

Drawer Kick-out Connector Pin Assignments

Pin Number	Signal Name	Direction
1	NC
2	Frame GND	Output
3	NC
4	Drawer kick-out drive signal	Output
5	NC
6	NC

3. Drawer kick-out drive signal
Output signal:	Output voltage:	Approximately 24 V
	Output current:	1A or less

-22- -23-