4. Configuration
Printer Control Panel & Status Indication
4.1) Panel LED indicators
a.PRP-080I (Standard)
(Blue LED) The POWER light is on whenever the printer is on.
(Red LED) This indicates printer online/offline status or an error
(Button) Press the FEED button to feed roll paper.
(Button) Press the ONLINE button to set printer
ONLINE/OFFLINE
Printer Status (Red LED)
Red light ON: Indicates that the printer is online.
Red light OFF: Indicates that the printer is offline.
Red light flashes: Indicates the printer error(s) such as out of paper, paper jammed, or printer cover is not closed properly
b.PRP-080II (Advanced)
1.Power (POWER) LED: Green On:Power is stable Off:Power is not stable
2.Error (ERROR) LED: Red
On: Off line (except during paper feeding using the FEED button and test printing, and the error state.)
Off: Normal condition
3.Paper roll end (PAPER OUT) LED: Red On: The paper roll near end is detected. Off: Paper is loaded (Normal condition).
4.2) DIP Switch Settings
The DIP switch panel is locating at bottom of the printer as shown:
a.
DIP Switch Functions:
Switch | Function | ON | OFF | Default |
1 | Baud Rate (*) | 38400 | 19200 | OFF |
2 | Auto Cutter | No | Yes | OFF |
3 | Color Deepness | Deeper | Normal | OFF |
4 | Beep | Yes | No | OFF |
b.
DIP Switch Functions:
Switch | Function | ON | OFF | Default |
Select cutter | No | Yes | OFF | |
|
|
|
|
|
Select beeper | Yes | No | OFF | |
|
|
|
|
|
Print density | Dark | Light | OFF | |
|
|
|
|
|
No | Yes | OFF | ||
Reserve |
|
| OFF | |
Reserve |
|
| OFF | |
Select Baud rate |
|
| OFF | |
Select Baud rate |
|
| OFF |
|
| Baudrate(bps) |
ON | ON | 38400 |
OFF | ON | 4800 |
ON | OFF | 9600 |
OFF | OFF | 19200 |
Note: Before configure the DIP switch settings, please first turn the printer power off and remove the paper roll.
(*) Baud Rate is only available for serial interface models.