Epson 830U manual 、Reset Procedure, 7Seventh step, 8Eighth step Nozzle check

Page 5

Too long

twist

Perfect

7)Seventh step

Instert the plug	Turn on the power switch check
	wether all thing is usual

8)Eighth step: Nozzle check

Usual

Broken line

The nozzle check patterns are in broken-line, mostly because of small dusk entered into the nozzle, after repeated cleaning, if there is still a few broken line, pls let the printer don’t work about 1 hour, then print the nozzle check pattern, maybe it works well.

4、Reset Procedure:

Image 5

Contents For ST Prefilled Version With Auto Reset Chips First step 、Installation Procedures、General Guide 4Fix Support Arm ）Second step Set up the Continuous Ink Supply System）Second step Remove cartridge Sixth Step Adjust the tubeline Fiveth step Install tubeline8Eighth step Nozzle check 、Reset Procedure7Seventh step 、Refill Ink 、Attention for maintenance