Orion Car Audio HCCA-D600 manual Introduction, Practice Safe Sound, What’s in the Box

Page 3

INTRODUCTION

Thank you for your purchase of Orion's HCCA-D600 power amplifier. Each Orion amplifier is designed to be the leader in its class offering the most power, advanced features, and extreme ease of use. In high-end sound systems or high SPL systems, Orion amplifiers will give you years of trouble-free performance.

HCCA-D600 - 600 Watt single-channel Class D amplifier with built-in fully variable high-pass, low-pass, or band-pass crossover with INTELLi BASS. Equipped with optional remote gain, the 600D is capable of one-channel operation with a max- imum power of 600 Watts into 1W.

The installation of all Orion components will determine the overall performance result. Improper installation will not only limit the performance of your Orion system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and component reliability, please refer to your authorized Orion dealer for installation assis- tance or advice. If you decide to perform the installation yourself, be sure to read the entire manual before beginning the installation.

What’s in the Box

(1) Amplifier

(1) Spare fuse

(1) Allen wrench 2.5mm

(1) Allen wrench 3mm

(1) Hardware pack (screws and washers)

(1) Amplifier installation and operation manual

(1) Orion vinyl window sticker

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure.

2

© 2005 Directed Electronics—all rights reserved

Image 3
Contents HCCA-D600 Contents Introduction Practice Safe SoundWhat’s in the Box Record Your Serial Number and Date END Panel Layouts HCCA-D600 CEA SpecificationsAmplifier Section HCCA-D600 SpecificationsAmplifier Settings Fine Tuning the Crossovers Adjusting INTELLi-BassLow-Pass Crossover Infinite Baffle Example High-Pass Set at 30Hz Sealed Example High-Pass Set at 20Hz Sealed Example High-Pass Set at 30HzVented Example High-Pass Set at 30Hz Speaker Connections Amplifier WiringPower Connections for the HCCA-D600 Remote Gain OperationAmplifier Installation BridgingChoosing Mounting Locations General Precautions and Installation Tips Passenger CompartmentTrunk Compartment Tools of the Trade Step By Step Installation-amplifierSET UP and Troubleshooting Step By Step Installation-remote gain control RGC-1-optionTesting the System Adjusting the Sound of the System Symptom Probable Cause Action To Take Troubleshooting TipsInternal Crossover Configuration Directed Electronics-all rights reserved Warranty