Basic Printing
To load envelopes:
1.Lower the paper thickness lever to the envelope mark.
2.Slide the paper feed guide completely to the left.
3.Press down on the corners and sides of the envelopes to make them as flat as possible by expelling all of the air in them. To avoid paper jams, make sure the envelops are flat before you load them into the sheet feeder.
4.With the address side facing up and pointed down, align the stack with the right side of the sheet feeder, then insert the stack into the printer.
5.Slide the paper guide right to the edge of the sheet.
•
•If the edges of the envelopes are not sharp, crease them with the side of a pen.
•You can load up to 10 standard #10 envelopes in the sheet feeder.
•Do not allow more than 10 envelopes to stack on the paper output tray.
13