Canon 800 manual To install the printer driver in Mac OS

Appendix

• If the setup program does not run automatically, click Start, then Run, then type x:\msetup.exe (where x is the CD-ROM drive).

•If prompted, select a language, then click OK.

3.Read the release notes, then click Next.

4.Read the License Agreement, then click Yes.

5.When the main menu appears, click Install Software.

If a message prompts you to restart Windows, remove the

CD-ROM, then click OK. After the computer restarts, re-insert the

CD-ROM and continue.

6.Select Printer Driver, then click Start. The printer driver will load automatically.

7.At a certain point in the installation process, you will be prompted to turn on the printer so the printer port (connection) can be automatically detected.

When prompted, turn on the printer. When the printer port has been identified, click OK.

If your computer cannot detect a printer port, see the troubleshooting tip for “Computer cannot detect a printer port” on page 37.

8.Click Yes if you are prompted to restart the computer.

When the software installation process is completed, click Exit.

To install the printer driver in Mac OS:

1.Prepare your Mac (if needed).

•If you have an iMac® with Mac OS 8.1, download and install the iMac Update 1.0 from www.apple.com.

•If you have multiple users set up in OS 9, log in as the Owner.

•To install the printer to a network, see the S800 Reference Guide on the Setup Software & Reference Guide CD-ROM.

54