Orion Car Audio HCCA 12.4 manual Parallel-One Speaker dual 4 ohm voice coils

Page 9

Parallel—One Speaker (dual 4 ohm voice coils)

One dual 4 ohm voice coil woofer with voice coils in parallel results in a 2 ohm load to the amplifier.

-

-

4 ohm

4 ohm

+

+

+

-

1.Connect the speaker in parallel by connecting the two positive (+) terminals together and the two negative (-) terminals together.

2.Wire both positive (+) terminals of the woofer to the positive (+) terminal on the amplifier. Wire both negative (-) terminals of the woofer to the negative (-) terminal

on the amplifier.

9

Image 9
Contents Hcca Table of Contents Installation IntroductionPractice Safe Sound Features Tools of the TradeFinding Speaker Mounting Locations Page RE-CONE KIT Wiring ConfigurationsOhm Parallel-One Speaker dual 2 ohm voice coilsParallel-Two Speakers dual 4 ohm voice coils Parallel-One Speaker dual 4 ohm voice coils Series-Parallel-Two Speakers dual 2 ohm voice coils Series-Parallel-Three Speakers dual 4 ohm voice coils Ohm + + Series-One Speaker dual 2 ohm voice coilsSeries-Parallel-Four Speakers dual 4 ohm voice coils Series-Parallel-Four Speakers dual 2 ohm voice coils Amplifiers-One Speaker dual 2 ohm voice coils Amplifiers-One Speaker dual 4 ohm voice coils Enclosure Design Hcca 10.2 & 10.4 Sealed Enclosure Recommendations Hcca 12.2 & 12.4 Sealed Enclosure Recommendations Hcca 15.2 & 15.4 Sealed Enclosure Recommendations Thiele/Small Parameters SpecificationsSpecifications CONT’D No Warranty This Product is Sold AS-IS