Orion Car Audio HCCA 12.4 manual Series-Parallel-Four Speakers dual 4 ohm voice coils

Page 13

Series-Parallel—Four Speakers (dual 4 ohm voice coils)

Note: Verify and ensure that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.

Four dual 4 ohm voice coil woofers should be wired with the voice coils on each woofer in series and then parallel the four woofers for a resulting 2 ohm load to the amplifier.

-

-

-

-

-

-

-

-

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

+

+

+

+

+

+

+

+

+

-

1.Connect each woofer in series by connecting the negative (-) of the first coil to the positive (+) terminal of the second coil.

2.Wire the positive (+) terminals of the first coil of each woofer to the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the second coil of each

woofer to the negative (-) terminal on the amplifier.

13

Image 13
Contents Hcca Table of Contents Introduction InstallationPractice Safe Sound Tools of the Trade FeaturesFinding Speaker Mounting Locations Page RE-CONE KIT Wiring ConfigurationsOhm Parallel-One Speaker dual 2 ohm voice coilsParallel-Two Speakers dual 4 ohm voice coils Parallel-One Speaker dual 4 ohm voice coils Series-Parallel-Two Speakers dual 2 ohm voice coils Series-Parallel-Three Speakers dual 4 ohm voice coils Ohm + + Series-One Speaker dual 2 ohm voice coilsSeries-Parallel-Four Speakers dual 4 ohm voice coils Series-Parallel-Four Speakers dual 2 ohm voice coils Amplifiers-One Speaker dual 2 ohm voice coils Amplifiers-One Speaker dual 4 ohm voice coils Enclosure Design Hcca 10.2 & 10.4 Sealed Enclosure Recommendations Hcca 12.2 & 12.4 Sealed Enclosure Recommendations Hcca 15.2 & 15.4 Sealed Enclosure Recommendations Thiele/Small Parameters SpecificationsSpecifications CONT’D No Warranty This Product is Sold AS-IS