| Install the Ink Tanks | Load all six ink tanks. |
|
| |
1 | Press the power button to turn on the | 2 | When the following screen appears, use | 3 | Select your local time zone and press OK. |
printer. | the ▲ and ▼ keys to select a language |
| |||
| and press OK. |
| |||
Data
Message
Language 㪈㪆㪉
English
Français
Italiano
Deutsch
Data
Message
Load FEED Cut Power
Menu | Stop |
Back | Navigate |
Time Zone | 㪈㪆㪌 |
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
4 | Instructions on ink tank installation |
are shown on the display screen. As | |
instructed, grab the handle on the ink tank |
cover to open it.
5 | While pressing the stopper of the ink tank | 6 | Shake the ink tanks gently 1 to 2 times |
lock lever inwards, open the ink tank lock | before opening the pouch. | ||
lever upwards. |
|
• Failure to shake ink tanks may result in reduced print quality because ink ingredients have settled on the bottom of the tank.
7 | Open the pouch and remove the ink tank. | 8 | Insert the ink tank into the holder facing |
| as shown, with the ink holes down. |
9 | Close the ink tank lock lever until it clicks |
red.into place. Make sure the ink lamp is lit in |
• Never touch the ink holes (a) | a |
or metal contacts (b). Touching | b |
these parts may cause stains, |
|
damage the ink tank, and affect |
|
print quality. |
|
•Avoid dropping the ink tank after removing it from the pouch.Otherwise, ink may leak and cause stains.
•Do not remove and shake ink tanks that have already been installed in the printer because ink may leak out.
• If the ink tank does not fit in the holder, 
make sure the color of the ink tank lock
lever matches the color of the ink tank, and check the orientation of the ink tank.
•If the ink lamp is not lit, repeat steps 5, 8, 
and 9.
10 | tanks. | 11 | Close the ink tank cover. | 9 |
| Repeat steps 5 to 9 to install all of the ink |
|
|
3