Canon IPF650, IPF655, IPF755, IPF750 setup guide Install the Printhead, Open Upper Cover is shown on

Page 4

Install the Printhead

Next, install the printhead.

1

Open Upper Cover is shown on the

cover.display screen. As instructed, open the top

a

Instructions on printhead replacement are shown on the display screen.

• When installing the printhead, do not

2

Pull the printhead fixer lever forward all

the way to open it completely.

move the carriage (a) from the position

 

shown in the figure.

 

If you move the carriage (a), a warning

 

 

noise sounds and the printhead cannot

 

 

be installed.

 

 

If you have moved the carriage (a),

 

 

close the top cover. The carriage (a)

 

 

moves to the position shown in the

 

 

figure.

 

 

3

Lift the printhead fixer cover to open it

4

Hold the printhead by the grips (a) as you

fully.

remove it from the pouch.

a

a

5

Remove the orange protective part (a).

To remove orange protective part (b),

push the grip (c) as you remove the part.

 

 

 

 

 

 

 

b

c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a

Never touch the parts covered by the protective part. This may damage the

printhead and affect printing quality.

The printhead contains ink, so be careful not to spill it once the protective part is removed.

Do not reattach the protective part after removing it. Dispose of these materials according to local regulations.

6

Insert the printhead into the carriage (b)

7

Pull the printhead fixer cover down toward

8

Push the printhead fixer lever all the way

with the ink holes (a) facing away from the

the front to lock the printhead in place.

back.

printer as shown in the figure. Carefully

 

push the printhead firmly into the carriage (b), ensuring that the part covered by the protective part does not touch the

carriage.a

b

9

Close the top cover.

4

Image 4
Contents Setup Guide Install without a stand on a table Proceed to step Install with a standPreparations Install the Ink Tanks Install the Printhead Open Upper Cover is shown onLoad Cut Sheet Paper Is shown on the display screen. CheckComputer and click Next Printer Installation dialog box WindowsPrinter Driver Select Country or Region of UseWhen you first connect the printer to the network Manuals CD-ROM in the CD-ROM drive and click NextAgreement, select I accept the terms License agreement, and then click NextResults window Window, and then click NextMethod of Configuring IP Search Results window, select Specify the IP address of availableIf the printer is already connected to the network Turn the computer on and insertA network and click Next IP address of available printers When entering the printers IP address manuallyNetwork and click Next Printer driver installation Is created after installation. iPFxxxxAn iPFxxxx Support desktop icon Represents the printer modelMacintosh Install the printer driverConnect the cable Click Continue Store Accessories in the Pockets Responding to Messages