Loading Paper into the MP Tray

The MP (multi-purpose) tray can hold up to approximately 125 sheets of 75 g/m2 paper for high-volume printing. Acceptable paper sizes are Legal, Letter, A4, Executive, and B5.

Follow the steps below to load a stack of paper.

Make sure that the input paper support is inserted into its slot in the printer.

1.Prepare a stack of paper and tap it on a ﬂat surface to properly align the edges.

2.Align the stack of paper so that the side to be printed on faces the front of the printer. The top edge of the paper should be toward the bottom of the MP tray. Slide the stack in until it stops. Do not force the paper into the printer.

.
on	printed

be		will
side
	This

English

Loading Paper into the MP Tray