Connecting to the Power Supply

Before inserting the plug, make sure that the rating indicated on the printer matches the voltage of the AC outlet.

1.Plug the power cord into the power socket.

2.Connect the other end of the power cord to the AC outlet.

3.Turn on the printer by pressing the I mark. Turn off the printer by pressing the O mark.

English

On position

Off position

If the power does not turn on even when the printer is plugged into an AC outlet, check the following items:

❏Close the front cover if open.

❏Make sure the EP-22 cartridge is installed.

❏If the EP-22 cartridge is already installed, remove and reinstall it.

❏To reset the printer, turn off the power using the power switch, and unplug the power cord. Wait two seconds or more, then connect the printer to the AC outlet again.

Connecting to the Power Supply