Important! Before you start, make sure you have the following computer setup. (These are the minimum requirements.)
IBM® PC or compatible computer with a 486 PC processor or better (Pentium® recommended)
Microsoft® Windows® 95 (not compatible with Windows 3.1)
16 megabytes (MB) of RAM Hard disk space:
MultiPASS Printer Driver, MultiPASS Desktop Manager for Windows 95, and ScanGear™ for MultiPASS – 25 MB
WebRecord™ – 8 MB
Internet Utilities 97™ – 7 MB
AT&T WorldNetSM Service including Microsoft Internet Explorer – 36 MB
| |||
| a cable less than 6.6 feet in length is recommended |
| |
| 14.4 Kbps modem or faster (28.2 Kbps recommended) |
| |
| Standard telephone line |
|
|
| CD ROM drive (2x or better) (If you do not have a CD ROM drive, you can call | ||
| the Canon Customer Care Center to order the MultiPASS Desktop Manager and | ||
| Printer Setup on diskettes. See page 23 for details.) |
| |
Unpack the MultiPASS L6000 |
|
| |
1 |
|
|
|
Carefully remove | Remove the items from the documentation package. |
| |
all items from | Remove these hardware items from the top tray: |
| |
the box. |
| ||
|
|
| |
| PAPER REST | EXTENSION TRAY | SUPPORT TRAYS |
PAPER LOADING | TELEPHONE | POWER | |
CARTRIDGE | LABEL | LINE | CORD |
Lift out the MultiPASS unit.
Always lift the unit from the bottom.
Important! Save the box and shipping materials. You may need them later if you have to transport the MultiPASS.
2